A custom linear solver class that is used to solve a block-factorised version of the Fold bifurcation detection problem. More...

#include <assembly_handler.h>

Inheritance diagram for oomph::AugmentedBlockFoldLinearSolver:

Public Member Functions
	AugmentedBlockFoldLinearSolver (LinearSolver *const linear_solver_pt)
	Constructor, inherits the original linear solver. More...

	~AugmentedBlockFoldLinearSolver ()
	Destructor: clean up the allocated memory. More...

void	solve (Problem *const &problem_pt, DoubleVector &result)
	The solve function uses the block factorisation. More...

void	solve (DoubleMatrixBase *const &matrix_pt, const DoubleVector &rhs, DoubleVector &result)
	The linear-algebra-type solver does not make sense. The interface is deliberately broken. More...

void	solve (DoubleMatrixBase *const &matrix_pt, const Vector< double > &rhs, Vector< double > &result)
	The linear-algebra-type solver does not make sense. The interface is deliberately broken. More...

void	resolve (const DoubleVector &rhs, DoubleVector &result)
	The resolve function also uses the block factorisation. More...

LinearSolver *	linear_solver_pt () const
	Access function to the original linear solver. More...

Public Member Functions inherited from oomph::LinearSolver
	LinearSolver ()
	Empty constructor, initialise the member data. More...

	LinearSolver (const LinearSolver &dummy)=delete
	Broken copy constructor. More...

void	operator= (const LinearSolver &)=delete
	Broken assignment operator. More...

virtual	~LinearSolver ()
	Empty virtual destructor. More...

void	enable_doc_time ()
	Enable documentation of solve times. More...

void	disable_doc_time ()
	Disable documentation of solve times. More...

bool	is_doc_time_enabled () const
	Is documentation of solve times enabled? More...

bool	is_resolve_enabled () const
	Boolean flag indicating if resolves are enabled. More...

virtual void	enable_resolve ()
	Enable resolve (i.e. store matrix and/or LU decomposition, say) Virtual so it can be overloaded to perform additional tasks. More...

virtual void	disable_resolve ()
	Disable resolve (i.e. store matrix and/or LU decomposition, say) This function simply resets an internal flag. It's virtual so it can be overloaded to perform additional tasks such as cleaning up memory that is only required for the resolve. More...

virtual void	solve_transpose (Problem *const &problem_pt, DoubleVector &result)
	Solver: Takes pointer to problem and returns the results vector which contains the solution of the linear system defined by the problem's fully assembled Jacobian and residual vector (broken virtual). More...

virtual void	solve_transpose (DoubleMatrixBase *const &matrix_pt, const DoubleVector &rhs, DoubleVector &result)
	Linear-algebra-type solver: Takes pointer to a matrix and rhs vector and returns the solution of the linear system. More...

virtual void	solve_transpose (DoubleMatrixBase *const &matrix_pt, const Vector< double > &rhs, Vector< double > &result)
	Linear-algebra-type solver: Takes pointer to a matrix and rhs vector and returns the solution of the linear system. More...

virtual void	resolve_transpose (const DoubleVector &rhs, DoubleVector &result)
	Solver: Resolve the system defined by the last assembled jacobian and the rhs vector. Solution is returned in the vector result. (broken virtual) More...

virtual void	clean_up_memory ()
	Empty virtual function that can be overloaded in specific linear solvers to clean up any memory that may have been allocated (e.g. when preparing for a re-solve). More...

virtual double	jacobian_setup_time () const
	returns the time taken to assemble the Jacobian matrix and residual vector (needs to be overloaded for each solver) More...

virtual double	linear_solver_solution_time () const
	return the time taken to solve the linear system (needs to be overloaded for each linear solver) More...

virtual void	enable_computation_of_gradient ()
	function to enable the computation of the gradient required for the globally convergent Newton method More...

void	disable_computation_of_gradient ()
	function to disable the computation of the gradient required for the globally convergent Newton method More...

void	reset_gradient ()
	function to reset the size of the gradient before each Newton solve More...

void	get_gradient (DoubleVector &gradient)
	function to access the gradient, provided it has been computed More...

Public Member Functions inherited from oomph::DistributableLinearAlgebraObject
	DistributableLinearAlgebraObject ()
	Default constructor - create a distribution. More...

	DistributableLinearAlgebraObject (const DistributableLinearAlgebraObject &matrix)=delete
	Broken copy constructor. More...

void	operator= (const DistributableLinearAlgebraObject &)=delete
	Broken assignment operator. More...

virtual	~DistributableLinearAlgebraObject ()
	Destructor. More...

LinearAlgebraDistribution *	distribution_pt () const
	access to the LinearAlgebraDistribution More...

unsigned	nrow () const
	access function to the number of global rows. More...

unsigned	nrow_local () const
	access function for the num of local rows on this processor. More...

unsigned	nrow_local (const unsigned &p) const
	access function for the num of local rows on this processor. More...

unsigned	first_row () const
	access function for the first row on this processor More...

unsigned	first_row (const unsigned &p) const
	access function for the first row on this processor More...

bool	distributed () const
	distribution is serial or distributed More...

bool	distribution_built () const
	if the communicator_pt is null then the distribution is not setup then false is returned, otherwise return true More...

void	build_distribution (const LinearAlgebraDistribution *const dist_pt)
	setup the distribution of this distributable linear algebra object More...

void	build_distribution (const LinearAlgebraDistribution &dist)
	setup the distribution of this distributable linear algebra object More...

Private Attributes
LinearSolver *	Linear_solver_pt
	Pointer to the original linear solver. More...

Problem *	Problem_pt

DoubleVector *	Alpha_pt
	Pointer to the storage for the vector alpha. More...

DoubleVector *	E_pt
	Pointer to the storage for the vector e. More...

Additional Inherited Members
Protected Member Functions inherited from oomph::DistributableLinearAlgebraObject
void	clear_distribution ()
	clear the distribution of this distributable linear algebra object More...

Protected Attributes inherited from oomph::LinearSolver
bool	Enable_resolve
	Boolean that indicates whether the matrix (or its factors, in the case of direct solver) should be stored so that the resolve function can be used. More...

bool	Doc_time
	Boolean flag that indicates whether the time taken. More...

bool	Compute_gradient
	flag that indicates whether the gradient required for the globally convergent Newton method should be computed or not More...

bool	Gradient_has_been_computed
	flag that indicates whether the gradient was computed or not More...

DoubleVector	Gradient_for_glob_conv_newton_solve
	DoubleVector storing the gradient for the globally convergent Newton method. More...

Detailed Description

A custom linear solver class that is used to solve a block-factorised version of the Fold bifurcation detection problem.

Definition at line 396 of file assembly_handler.h.

Constructor & Destructor Documentation

◆ AugmentedBlockFoldLinearSolver()

oomph::AugmentedBlockFoldLinearSolver::AugmentedBlockFoldLinearSolver ( LinearSolver *const linear_solver_pt )

inline

Constructor, inherits the original linear solver.

Definition at line 412 of file assembly_handler.h.

◆ ~AugmentedBlockFoldLinearSolver()

oomph::AugmentedBlockFoldLinearSolver::~AugmentedBlockFoldLinearSolver ( )

Destructor: clean up the allocated memory.

Clean up the memory that may have been allocated by the solver.

Definition at line 389 of file assembly_handler.cc.

References Alpha_pt, and E_pt.

Member Function Documentation

◆ linear_solver_pt()

LinearSolver* oomph::AugmentedBlockFoldLinearSolver::linear_solver_pt ( ) const

inline

Access function to the original linear solver.

Definition at line 451 of file assembly_handler.h.

References Linear_solver_pt.

Referenced by oomph::FoldHandler::~FoldHandler().

◆ resolve()

void oomph::AugmentedBlockFoldLinearSolver::resolve	(	const DoubleVector &	rhs,
		DoubleVector &	result
	)

virtual

The resolve function also uses the block factorisation.

Reimplemented from oomph::LinearSolver.

Definition at line 677 of file assembly_handler.cc.

References oomph::Problem::actions_after_change_in_bifurcation_parameter(), Alpha_pt, oomph::Problem::assembly_handler_pt(), oomph::DoubleVector::build(), oomph::DoubleVector::built(), oomph::LinearSolver::disable_resolve(), oomph::DistributableLinearAlgebraObject::distributed(), oomph::DistributableLinearAlgebraObject::distribution_pt(), oomph::Problem::dof(), e, oomph::Mesh::element_pt(), oomph::LinearSolver::enable_resolve(), oomph::FoldHandler::eqn_number(), oomph::BlackBoxFDNewtonSolver::FD_step, oomph::FoldHandler::get_jacobian(), Linear_solver_pt, oomph::Problem::mesh_pt(), oomph::Problem::ndof(), oomph::FoldHandler::ndof(), oomph::Mesh::nelement(), Problem_pt, oomph::LinearSolver::resolve(), oomph::FoldHandler::solve_augmented_block_system(), oomph::FoldHandler::solve_full_system(), and oomph::FoldHandler::Y.

◆ solve() [1/3]

void oomph::AugmentedBlockFoldLinearSolver::solve	(	DoubleMatrixBase *const &	matrix_pt,
		const DoubleVector &	rhs,
		DoubleVector &	result
	)

inlinevirtual

The linear-algebra-type solver does not make sense. The interface is deliberately broken.

Reimplemented from oomph::LinearSolver.

Definition at line 425 of file assembly_handler.h.

◆ solve() [2/3]

void oomph::AugmentedBlockFoldLinearSolver::solve	(	DoubleMatrixBase *const &	matrix_pt,
		const Vector< double > &	rhs,
		Vector< double > &	result
	)

inlinevirtual

The linear-algebra-type solver does not make sense. The interface is deliberately broken.

Reimplemented from oomph::LinearSolver.

Definition at line 437 of file assembly_handler.h.

◆ solve() [3/3]

void oomph::AugmentedBlockFoldLinearSolver::solve	(	Problem *const &	problem_pt,
		DoubleVector &	result
	)

virtual

The solve function uses the block factorisation.

Use a block factorisation to solve the augmented system associated with a PitchFork bifurcation.

Implements oomph::LinearSolver.

Definition at line 405 of file assembly_handler.cc.

References oomph::Problem::actions_after_change_in_bifurcation_parameter(), Alpha_pt, oomph::Problem::assembly_handler_pt(), oomph::DoubleVector::build(), oomph::DistributableLinearAlgebraObject::build_distribution(), oomph::DoubleVector::built(), oomph::Problem::communicator_pt(), oomph::LinearSolver::disable_resolve(), oomph::DistributableLinearAlgebraObject::distributed(), oomph::DistributableLinearAlgebraObject::distribution_pt(), oomph::Problem::dof(), e, E_pt, oomph::Mesh::element_pt(), oomph::LinearSolver::Enable_resolve, oomph::LinearSolver::enable_resolve(), oomph::GeneralisedElement::eqn_number(), oomph::FoldHandler::eqn_number(), oomph::BlackBoxFDNewtonSolver::FD_step, oomph::FoldHandler::get_jacobian(), oomph::GeneralisedElement::get_jacobian(), Linear_solver_pt, oomph::Problem::mesh_pt(), oomph::GeneralisedElement::ndof(), oomph::Problem::ndof(), oomph::FoldHandler::ndof(), oomph::Mesh::nelement(), Problem_pt, oomph::LinearSolver::resolve(), oomph::Problem::sign_of_jacobian(), oomph::LinearSolver::solve(), oomph::FoldHandler::solve_augmented_block_system(), oomph::FoldHandler::solve_full_system(), and oomph::FoldHandler::Y.

Member Data Documentation

◆ Alpha_pt

DoubleVector* oomph::AugmentedBlockFoldLinearSolver::Alpha_pt

private

Pointer to the storage for the vector alpha.

Definition at line 405 of file assembly_handler.h.

Referenced by resolve(), solve(), and ~AugmentedBlockFoldLinearSolver().

◆ E_pt

DoubleVector* oomph::AugmentedBlockFoldLinearSolver::E_pt

private

Pointer to the storage for the vector e.

Definition at line 408 of file assembly_handler.h.

Referenced by solve(), and ~AugmentedBlockFoldLinearSolver().

◆ Linear_solver_pt

LinearSolver* oomph::AugmentedBlockFoldLinearSolver::Linear_solver_pt

private

Pointer to the original linear solver.

Definition at line 399 of file assembly_handler.h.

Referenced by linear_solver_pt(), resolve(), and solve().

◆ Problem_pt

Problem* oomph::AugmentedBlockFoldLinearSolver::Problem_pt

private

Definition at line 402 of file assembly_handler.h.

Referenced by resolve(), and solve().

The documentation for this class was generated from the following files:

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AugmentedBlockFoldLinearSolver()

◆ ~AugmentedBlockFoldLinearSolver()

Member Function Documentation

◆ linear_solver_pt()

◆ resolve()

◆ solve() [1/3]

◆ solve() [2/3]

◆ solve() [3/3]

Member Data Documentation

◆ Alpha_pt

◆ E_pt

◆ Linear_solver_pt

◆ Problem_pt