Go to the source code of this file.
Classes | |
| class | oomph::PseudoElasticBulkElement< ELEMENT > |
| Pseudo-Elastic Solid element class to overload the Block Preconditioner methods ndof_types() and get_dof_numbers_for_unknowns() to differentiate between DOFs subject to Lagrange multiplier and those that are not. More... | |
| class | oomph::FaceGeometry< PseudoElasticBulkElement< ELEMENT > > |
| FaceGeometry of wrapped element is the same as the underlying element. More... | |
| class | UndeformedLeaflet |
| ///////////////////////////////////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////// More... | |
| class | FSIChannelWithLeafletProblem< ELEMENT > |
| ///////////////////////////////////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////// More... | |
Namespaces | |
| oomph | |
| ////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////// | |
| LSC_Preconditioner_Helper | |
| //////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////// | |
| Global_Parameters | |
| ////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////// | |
Functions | |
| Preconditioner * | LSC_Preconditioner_Helper::set_hypre_preconditioner () |
| Create instance of Hypre preconditioner with settings that are appropriate for serial solution of Navier-Stokes momentum block. More... | |
| double | Global_Parameters::flux (const double &t) |
| Flux: Pulsatile flow. More... | |
| int | main (int argc, char **argv) |
| Driver code. More... | |
Variables | |
| double | Global_Parameters::Leaflet_x0 = 1.0 |
| x-position of root of leaflet More... | |
| double | Global_Parameters::Leaflet_height =0.5 |
| height of leaflet More... | |
| double | Global_Parameters::Fluid_length_left =1.0 |
| length of fluid mesh to left of leaflet More... | |
| double | Global_Parameters::Fluid_length_right =3.0 |
| length of fluid mesh to right of leaflet More... | |
| double | Global_Parameters::Fluid_height =1.0 |
| height of fluid mesh More... | |
| unsigned | Global_Parameters::Mesh_nleft =4 |
| Num elements to left of leaflet in coarse mesh. More... | |
| unsigned | Global_Parameters::Mesh_nright =12 |
| Num elements to right of leaflet in coarse mesh. More... | |
| unsigned | Global_Parameters::Mesh_ny1 =2 |
| Num elements in fluid mesh in y dirn adjacent to leaflet. More... | |
| unsigned | Global_Parameters::Mesh_ny2 =2 |
| Num elements in fluid mesh in y dirn above leaflet. More... | |
| double | Global_Parameters::Re =50.0 |
| Reynolds number. More... | |
| double | Global_Parameters::ReSt =50.0 |
| Womersley number: Product of Reynolds and Strouhal numbers. More... | |
| double | Global_Parameters::H =0.05 |
| Non-dimensional wall thickness. More... | |
| double | Global_Parameters::Q =2.0e-7 |
| Fluid structure interaction parameter: Ratio of stresses used for non-dimensionalisation of fluid to solid stresses. More... | |
| double | Global_Parameters::T =1.0 |
| Period for fluctuations in flux. More... | |
| double | Global_Parameters::U_base =1.0 |
| Min. flux. More... | |
| double | Global_Parameters::U_perturbation =0.5 |
| Max. flux. More... | |
| double | Global_Parameters::Lambda_sq =0.0 |
| Pseudo-solid mass density. More... | |
| double | Global_Parameters::Lambda_sq_beam =0.0 |
| Beam mass density. More... | |
| double | Global_Parameters::Nu =0.1 |
| Pseudo-solid Poisson ratio. More... | |
| double | Global_Parameters::Dt = T/40.0 |
| Timestep for simulation: 40 steps per period. More... | |
| int main | ( | int | argc, |
| char ** | argv | ||
| ) |
Driver code.
Definition at line 1068 of file fsi_channel_with_leaflet_precond.cc.
References Global_Parameters::Dt, Global_Parameters::Re, Global_Parameters::ReSt, and Global_Parameters::T.