Class to collate parameters for Gmsh mesh generation. More...

#include <gmsh_tet_mesh.template.h>

Public Member Functions
	GmshParameters (TetMeshFacetedClosedSurface *const &outer_boundary_pt, const std::string &gmsh_command_line_invocation)
	Specify outer boundary of domain to be meshed. Other parameters get default values and can be set via member functions. More...

TetMeshFacetedClosedSurface *&	outer_boundary_pt ()
	Outer boundary. More...

Vector< TetMeshFacetedSurface * > &	internal_surface_pt ()
	Internal boundaries. More...

double &	element_volume ()
	Uniform target element volume. More...

std::string &	target_size_file_name ()
	Filename for target volumes (for system-call based transfer to gmsh during mesh adaptation). Default: .gmsh_target_size_for_adaptation.dat. More...

std::string &	gmsh_command_line_invocation ()
	String to be issued via system command to activate gmsh. More...

std::string &	geo_and_msh_file_stem ()
	Stem for geo and msh files (input/output to command-line gmsh invocation) More...

double &	max_element_size ()
	Max. element size during refinement. More...

double &	min_element_size ()
	Min. element size during refinement. More...

double &	max_permitted_edge_ratio ()
	Max. permitted edge ratio. More...

double &	dx_for_target_size_transfer ()
	(Isotropic) grid spacing for target size transfer More...

unsigned &	max_sample_points_for_limited_locate_zeta_during_target_size_transfer ()
	Target size is transferred onto regular grid (for gmsh) by locate zeta. We try to find the exact point in the existing mesh but if we fail to converge from the nearest specified number of sample points we use the nearest of those. More...

std::string &	stem_for_filename_gmsh_size_transfer ()
	Stem for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative) More...

int &	counter_for_filename_gmsh_size_transfer ()
	Counter for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative) More...

bool	projection_is_disabled ()
	Is projection of old solution onto new mesh disabled? More...

void	disable_projection ()
	Disable projection of old solution onto new mesh. More...

void	enable_projection ()
	Disable projection of old solution onto new mesh. More...

std::string &	gmsh_onscreen_output_file_name ()
	Output filename for gmsh on-screen output. More...

unsigned &	gmsh_onscreen_output_counter ()
	Counter for marker that indicates where we are in gmsh on-screen output. More...

Private Attributes
TetMeshFacetedClosedSurface *	Outer_boundary_pt
	Pointer to outer boundary. More...

Vector< TetMeshFacetedSurface * >	Internal_surface_pt
	Internal boundaries. More...

double	Element_volume
	Uniform element volume. More...

std::string	Target_size_file_name
	Filename for target volume (for system-call based transfer to gmsh during mesh adaptation) More...

std::string	Geo_and_msh_file_stem
	Stem for geo and msh files (input/output to command-line gmsh invocation) More...

std::string	Gmsh_command_line_invocation
	Gmsh command line invocation string. More...

double	Max_element_size
	Max. element size during refinement. More...

double	Min_element_size
	Min. element size during refinement. More...

double	Max_permitted_edge_ratio
	Max edge ratio before remesh gets triggered. More...

double	Dx_for_target_size_transfer
	(Isotropic) grid spacing for target size transfer More...

unsigned	Max_sample_points_for_limited_locate_zeta_during_target_size_transfer
	Target size is transferred onto regular grid (for gmsh) by locate zeta. We try to find the exact point in the existing mesh but if we fail to converge from the nearest specified number of sample points we use the nearest of those. More...

std::string	Stem_for_filename_gmsh_size_transfer
	Stem for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative) More...

int	Counter_for_filename_gmsh_size_transfer
	Counter for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative) More...

bool	Projection_is_disabled
	Is projection of old solution onto new mesh disabled? More...

std::string	Gmsh_onscreen_output_file_name
	Output filename for gmsh on-screen output. More...

unsigned	Gmsh_onscreen_output_counter
	Counter for marker that indicates where we are in gmsh on-screen output. More...

Detailed Description

Class to collate parameters for Gmsh mesh generation.

Definition at line 49 of file gmsh_tet_mesh.template.h.

Constructor & Destructor Documentation

◆ GmshParameters()

oomph::GmshParameters::GmshParameters	(	TetMeshFacetedClosedSurface *const &	outer_boundary_pt,
		const std::string &	gmsh_command_line_invocation
	)

inline

Specify outer boundary of domain to be meshed. Other parameters get default values and can be set via member functions.

Definition at line 55 of file gmsh_tet_mesh.template.h.

Member Function Documentation

◆ counter_for_filename_gmsh_size_transfer()

int& oomph::GmshParameters::counter_for_filename_gmsh_size_transfer ( )

inline

Counter for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative)

Definition at line 160 of file gmsh_tet_mesh.template.h.

References Counter_for_filename_gmsh_size_transfer.

◆ disable_projection()

void oomph::GmshParameters::disable_projection ( )

inline

Disable projection of old solution onto new mesh.

Definition at line 172 of file gmsh_tet_mesh.template.h.

References Projection_is_disabled.

◆ dx_for_target_size_transfer()

double& oomph::GmshParameters::dx_for_target_size_transfer ( )

inline

(Isotropic) grid spacing for target size transfer

Definition at line 135 of file gmsh_tet_mesh.template.h.

References Dx_for_target_size_transfer.

◆ element_volume()

double& oomph::GmshParameters::element_volume ( )

inline

Uniform target element volume.

Definition at line 89 of file gmsh_tet_mesh.template.h.

References Element_volume.

Referenced by oomph::GmshTetScaffoldMesh::write_geo_file().

◆ enable_projection()

void oomph::GmshParameters::enable_projection ( )

inline

Disable projection of old solution onto new mesh.

Definition at line 178 of file gmsh_tet_mesh.template.h.

References Projection_is_disabled.

◆ geo_and_msh_file_stem()

std::string& oomph::GmshParameters::geo_and_msh_file_stem ( )

inline

Stem for geo and msh files (input/output to command-line gmsh invocation)

Definition at line 110 of file gmsh_tet_mesh.template.h.

References Geo_and_msh_file_stem.

Referenced by oomph::GmshTetScaffoldMesh::create_mesh_from_msh_file(), oomph::GmshTetScaffoldMesh::GmshTetScaffoldMesh(), and oomph::GmshTetScaffoldMesh::write_geo_file().

◆ gmsh_command_line_invocation()

std::string& oomph::GmshParameters::gmsh_command_line_invocation ( )

inline

String to be issued via system command to activate gmsh.

Definition at line 103 of file gmsh_tet_mesh.template.h.

References Gmsh_command_line_invocation.

Referenced by oomph::GmshTetScaffoldMesh::GmshTetScaffoldMesh().

◆ gmsh_onscreen_output_counter()

unsigned& oomph::GmshParameters::gmsh_onscreen_output_counter ( )

inline

Counter for marker that indicates where we are in gmsh on-screen output.

Definition at line 191 of file gmsh_tet_mesh.template.h.

References Gmsh_onscreen_output_counter.

Referenced by oomph::GmshTetScaffoldMesh::GmshTetScaffoldMesh().

◆ gmsh_onscreen_output_file_name()

std::string& oomph::GmshParameters::gmsh_onscreen_output_file_name ( )

inline

Output filename for gmsh on-screen output.

Definition at line 184 of file gmsh_tet_mesh.template.h.

References Gmsh_onscreen_output_file_name.

Referenced by oomph::GmshTetScaffoldMesh::GmshTetScaffoldMesh().

◆ internal_surface_pt()

Vector<TetMeshFacetedSurface*>& oomph::GmshParameters::internal_surface_pt ( )

inline

Internal boundaries.

Definition at line 83 of file gmsh_tet_mesh.template.h.

References Internal_surface_pt.

Referenced by oomph::GmshTetMesh< ELEMENT >::build_it(), and oomph::GmshTetScaffoldMesh::write_geo_file().

◆ max_element_size()

double& oomph::GmshParameters::max_element_size ( )

inline

Max. element size during refinement.

Definition at line 117 of file gmsh_tet_mesh.template.h.

References Max_element_size.

Referenced by oomph::RefineableGmshTetMesh< ELEMENT >::initialise_adaptation_data().

◆ max_permitted_edge_ratio()

double& oomph::GmshParameters::max_permitted_edge_ratio ( )

inline

Max. permitted edge ratio.

Definition at line 129 of file gmsh_tet_mesh.template.h.

References Max_permitted_edge_ratio.

Referenced by oomph::RefineableGmshTetMesh< ELEMENT >::initialise_adaptation_data().

◆ max_sample_points_for_limited_locate_zeta_during_target_size_transfer()

unsigned& oomph::GmshParameters::max_sample_points_for_limited_locate_zeta_during_target_size_transfer ( )

inline

Target size is transferred onto regular grid (for gmsh) by locate zeta. We try to find the exact point in the existing mesh but if we fail to converge from the nearest specified number of sample points we use the nearest of those.

Definition at line 144 of file gmsh_tet_mesh.template.h.

References Max_sample_points_for_limited_locate_zeta_during_target_size_transfer.

◆ min_element_size()

double& oomph::GmshParameters::min_element_size ( )

inline

Min. element size during refinement.

Definition at line 123 of file gmsh_tet_mesh.template.h.

References Min_element_size.

Referenced by oomph::RefineableGmshTetMesh< ELEMENT >::initialise_adaptation_data().

◆ outer_boundary_pt()

TetMeshFacetedClosedSurface*& oomph::GmshParameters::outer_boundary_pt ( )

inline

Outer boundary.

Definition at line 77 of file gmsh_tet_mesh.template.h.

References Outer_boundary_pt.

Referenced by oomph::GmshTetMesh< ELEMENT >::build_it(), and oomph::GmshTetScaffoldMesh::write_geo_file().

◆ projection_is_disabled()

bool oomph::GmshParameters::projection_is_disabled ( )

inline

Is projection of old solution onto new mesh disabled?

Definition at line 166 of file gmsh_tet_mesh.template.h.

References Projection_is_disabled.

◆ stem_for_filename_gmsh_size_transfer()

std::string& oomph::GmshParameters::stem_for_filename_gmsh_size_transfer ( )

inline

Stem for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative)

Definition at line 152 of file gmsh_tet_mesh.template.h.

References Stem_for_filename_gmsh_size_transfer.

◆ target_size_file_name()

std::string& oomph::GmshParameters::target_size_file_name ( )

inline

Filename for target volumes (for system-call based transfer to gmsh during mesh adaptation). Default: .gmsh_target_size_for_adaptation.dat.

Definition at line 97 of file gmsh_tet_mesh.template.h.

References Target_size_file_name.

Referenced by oomph::GmshTetScaffoldMesh::write_geo_file().

Member Data Documentation

◆ Counter_for_filename_gmsh_size_transfer

int oomph::GmshParameters::Counter_for_filename_gmsh_size_transfer

private

Counter for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative)

Definition at line 244 of file gmsh_tet_mesh.template.h.

Referenced by counter_for_filename_gmsh_size_transfer().

◆ Dx_for_target_size_transfer

double oomph::GmshParameters::Dx_for_target_size_transfer

private

(Isotropic) grid spacing for target size transfer

Definition at line 227 of file gmsh_tet_mesh.template.h.

Referenced by dx_for_target_size_transfer().

◆ Element_volume

double oomph::GmshParameters::Element_volume

private

Uniform element volume.

Definition at line 204 of file gmsh_tet_mesh.template.h.

Referenced by element_volume().

◆ Geo_and_msh_file_stem

std::string oomph::GmshParameters::Geo_and_msh_file_stem

private

Stem for geo and msh files (input/output to command-line gmsh invocation)

Definition at line 212 of file gmsh_tet_mesh.template.h.

Referenced by geo_and_msh_file_stem().

◆ Gmsh_command_line_invocation

std::string oomph::GmshParameters::Gmsh_command_line_invocation

private

Gmsh command line invocation string.

Definition at line 215 of file gmsh_tet_mesh.template.h.

Referenced by gmsh_command_line_invocation().

◆ Gmsh_onscreen_output_counter

unsigned oomph::GmshParameters::Gmsh_onscreen_output_counter

private

Counter for marker that indicates where we are in gmsh on-screen output.

Definition at line 254 of file gmsh_tet_mesh.template.h.

Referenced by gmsh_onscreen_output_counter().

◆ Gmsh_onscreen_output_file_name

std::string oomph::GmshParameters::Gmsh_onscreen_output_file_name

private

Output filename for gmsh on-screen output.

Definition at line 250 of file gmsh_tet_mesh.template.h.

Referenced by gmsh_onscreen_output_file_name().

◆ Internal_surface_pt

Vector<TetMeshFacetedSurface*> oomph::GmshParameters::Internal_surface_pt

private

Internal boundaries.

Definition at line 201 of file gmsh_tet_mesh.template.h.

Referenced by internal_surface_pt().

◆ Max_element_size

double oomph::GmshParameters::Max_element_size

private

Max. element size during refinement.

Definition at line 218 of file gmsh_tet_mesh.template.h.

Referenced by max_element_size().

◆ Max_permitted_edge_ratio

double oomph::GmshParameters::Max_permitted_edge_ratio

private

Max edge ratio before remesh gets triggered.

Definition at line 224 of file gmsh_tet_mesh.template.h.

Referenced by max_permitted_edge_ratio().

◆ Max_sample_points_for_limited_locate_zeta_during_target_size_transfer

unsigned oomph::GmshParameters::Max_sample_points_for_limited_locate_zeta_during_target_size_transfer

private

Target size is transferred onto regular grid (for gmsh) by locate zeta. We try to find the exact point in the existing mesh but if we fail to converge from the nearest specified number of sample points we use the nearest of those.

Definition at line 234 of file gmsh_tet_mesh.template.h.

Referenced by max_sample_points_for_limited_locate_zeta_during_target_size_transfer().

◆ Min_element_size

double oomph::GmshParameters::Min_element_size

private

Min. element size during refinement.

Definition at line 221 of file gmsh_tet_mesh.template.h.

Referenced by min_element_size().

◆ Outer_boundary_pt

TetMeshFacetedClosedSurface* oomph::GmshParameters::Outer_boundary_pt

private

Pointer to outer boundary.

Definition at line 198 of file gmsh_tet_mesh.template.h.

Referenced by outer_boundary_pt().

◆ Projection_is_disabled

bool oomph::GmshParameters::Projection_is_disabled

private

Is projection of old solution onto new mesh disabled?

Definition at line 247 of file gmsh_tet_mesh.template.h.

Referenced by disable_projection(), enable_projection(), and projection_is_disabled().

◆ Stem_for_filename_gmsh_size_transfer

std::string oomph::GmshParameters::Stem_for_filename_gmsh_size_transfer

private

Stem for filename used to doc target element sizes on gmsh grid. No doc if stem is equal to empty string (or counter is negative)

Definition at line 239 of file gmsh_tet_mesh.template.h.

Referenced by stem_for_filename_gmsh_size_transfer().

◆ Target_size_file_name

std::string oomph::GmshParameters::Target_size_file_name

private

Filename for target volume (for system-call based transfer to gmsh during mesh adaptation)

Definition at line 208 of file gmsh_tet_mesh.template.h.

Referenced by target_size_file_name().

The documentation for this class was generated from the following file:

gmsh_tet_mesh.template.h

Public Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ GmshParameters()

Member Function Documentation

◆ counter_for_filename_gmsh_size_transfer()

◆ disable_projection()

◆ dx_for_target_size_transfer()

◆ element_volume()

◆ enable_projection()

◆ geo_and_msh_file_stem()

◆ gmsh_command_line_invocation()

◆ gmsh_onscreen_output_counter()

◆ gmsh_onscreen_output_file_name()

◆ internal_surface_pt()

◆ max_element_size()

◆ max_permitted_edge_ratio()

◆ max_sample_points_for_limited_locate_zeta_during_target_size_transfer()

◆ min_element_size()

◆ outer_boundary_pt()

◆ projection_is_disabled()

◆ stem_for_filename_gmsh_size_transfer()

◆ target_size_file_name()

Member Data Documentation

◆ Counter_for_filename_gmsh_size_transfer

◆ Dx_for_target_size_transfer

◆ Element_volume

◆ Geo_and_msh_file_stem

◆ Gmsh_command_line_invocation

◆ Gmsh_onscreen_output_counter

◆ Gmsh_onscreen_output_file_name

◆ Internal_surface_pt

◆ Max_element_size

◆ Max_permitted_edge_ratio

◆ Max_sample_points_for_limited_locate_zeta_during_target_size_transfer

◆ Min_element_size

◆ Outer_boundary_pt

◆ Projection_is_disabled

◆ Stem_for_filename_gmsh_size_transfer

◆ Target_size_file_name