Brick mesh layer built on top of a given tet mesh. Typically used in FSI problems where the tet mesh is the fluid mesh and this mesh acts as the solid mesh that surrounds the FSI interface. More...

#include <thin_layer_brick_on_tet_mesh.template.h>

Inheritance diagram for oomph::ThinLayerBrickOnTetMesh< ELEMENT >:

Public Types
typedef void(*	ThicknessFctPt) (const Vector< double > &x, double &h_thick)
	Function pointer to function that specifies the wall thickness as a fct of the coordinates of the inner surface. More...

Public Member Functions
	ThinLayerBrickOnTetMesh (Mesh tet_mesh_pt, const Vector< unsigned > &boundary_ids, ThicknessFctPt thickness_fct_pt, const unsigned &nlayer, const Vector< Vector< unsigned >> &in_out_boundary_id, TimeStepper time_stepper_pt=&Mesh::Default_TimeStepper)
	Constructor: Specify (quadratic) tet mesh, boundary IDs of boundary on which the current mesh is to be erected (in an FSI context this boundary tends to be the FSI boundary of the fluid mesh. Also specify the uniform thickness of layer, and the number of element layers. The vectors stored in in_out_boundary_ids contain the boundary IDs of the other boundaries in the tet mesh. In an FSI context these typically identify the in/outflow boundaries in the fluid mesh. The boundary enumeration of the current mesh follows the one of the underlying fluid mesh: The enumeration of the FSI boundary matches (to enable the setup of the FSI matching); the "in/outflow" faces in this mesh inherit the same enumeration as the in/outflow faces in the underlying fluid mesh. Finally, the "outer" boundary gets its own boundary ID. Timestepper defaults to steady pseudo-timestepper. More...

Vector< unsigned >	fsi_boundary_id ()
	Access functions to the Vector of oomph-lib boundary ids that make up boundary on which the mesh was erected (typically the FSI interface in an FSI problem) More...

unsigned	outer_boundary_id ()
	Boundary ID of the "outer" surface – in an FSI context this is the non-wetted tube surface at a distance h_thick from the FSI surface. More...

Vector< unsigned >	in_out_boundary_id (const unsigned &boundary_id)
	Access function to the vector containing the ids of the oomph-lib mesh boundaries that make up the specified in/outflow boundaries as specified in constructor. More...

Private Attributes
Vector< unsigned >	FSI_boundary_id
	Vector of oomph-lib boundary ids that make up boundary on which the mesh was erected (typically the FSI interface in an FSI problem) More...

unsigned	Outer_boundary_id
	Boundary ID of the "outer" surface – the non-wetted tube surface at a distance h_thick from the FSI surface. More...

Vector< Vector< unsigned > >	In_out_boundary_id
	Vector of vectors containing the ids of the oomph-lib mesh boundaries that make up the specified in/outflow boundaries. More...

ThicknessFctPt	Thickness_fct_pt
	Function pointer to function that specifies the wall thickness as a fct of the coordinates of the inner surface. More...

Detailed Description

template<class ELEMENT>
class oomph::ThinLayerBrickOnTetMesh< ELEMENT >

Brick mesh layer built on top of a given tet mesh. Typically used in FSI problems where the tet mesh is the fluid mesh and this mesh acts as the solid mesh that surrounds the FSI interface.

Definition at line 41 of file thin_layer_brick_on_tet_mesh.template.h.

Member Typedef Documentation

◆ ThicknessFctPt

template<class ELEMENT >

typedef void(* oomph::ThinLayerBrickOnTetMesh< ELEMENT >::ThicknessFctPt) (const Vector< double > &x, double &h_thick)

Function pointer to function that specifies the wall thickness as a fct of the coordinates of the inner surface.

Definition at line 46 of file thin_layer_brick_on_tet_mesh.template.h.

Constructor & Destructor Documentation

◆ ThinLayerBrickOnTetMesh()

template<class ELEMENT >

oomph::ThinLayerBrickOnTetMesh< ELEMENT >::ThinLayerBrickOnTetMesh	(	Mesh *	tet_mesh_pt,
		const Vector< unsigned > &	boundary_ids,
		ThicknessFctPt	thickness_fct_pt,
		const unsigned &	nlayer,
		const Vector< Vector< unsigned >> &	in_out_boundary_id,
		TimeStepper *	time_stepper_pt = `&Mesh::Default_TimeStepper`
	)

Constructor: Specify (quadratic) tet mesh, boundary IDs of boundary on which the current mesh is to be erected (in an FSI context this boundary tends to be the FSI boundary of the fluid mesh. Also specify the uniform thickness of layer, and the number of element layers. The vectors stored in in_out_boundary_ids contain the boundary IDs of the other boundaries in the tet mesh. In an FSI context these typically identify the in/outflow boundaries in the fluid mesh. The boundary enumeration of the current mesh follows the one of the underlying fluid mesh: The enumeration of the FSI boundary matches (to enable the setup of the FSI matching); the "in/outflow" faces in this mesh inherit the same enumeration as the in/outflow faces in the underlying fluid mesh. Finally, the "outer" boundary gets its own boundary ID. Timestepper defaults to steady pseudo-timestepper.

Definition at line 53 of file thin_layer_brick_on_tet_mesh.template.cc.

References oomph::ThinLayerBrickOnTetMesh< ELEMENT >::FSI_boundary_id, oomph::ThinLayerBrickOnTetMesh< ELEMENT >::in_out_boundary_id(), oomph::ThinLayerBrickOnTetMesh< ELEMENT >::In_out_boundary_id, oomph::ThinLayerBrickOnTetMesh< ELEMENT >::Outer_boundary_id, and oomph::ThinLayerBrickOnTetMesh< ELEMENT >::Thickness_fct_pt.

Member Function Documentation

◆ fsi_boundary_id()

template<class ELEMENT >

Vector<unsigned> oomph::ThinLayerBrickOnTetMesh< ELEMENT >::fsi_boundary_id ( )

inline

Access functions to the Vector of oomph-lib boundary ids that make up boundary on which the mesh was erected (typically the FSI interface in an FSI problem)

Definition at line 74 of file thin_layer_brick_on_tet_mesh.template.h.

References oomph::ThinLayerBrickOnTetMesh< ELEMENT >::FSI_boundary_id.

◆ in_out_boundary_id()

template<class ELEMENT >

Vector<unsigned> oomph::ThinLayerBrickOnTetMesh< ELEMENT >::in_out_boundary_id ( const unsigned & boundary_id )

inline

Access function to the vector containing the ids of the oomph-lib mesh boundaries that make up the specified in/outflow boundaries as specified in constructor.

Definition at line 90 of file thin_layer_brick_on_tet_mesh.template.h.

References oomph::ThinLayerBrickOnTetMesh< ELEMENT >::In_out_boundary_id.

Referenced by oomph::ThinLayerBrickOnTetMesh< ELEMENT >::ThinLayerBrickOnTetMesh().