///////////////////////////////////////////////////////////////// ///////////////////////////////////////////////////////////////// More...
#include <backward_step_mesh.template.h>
Inheritance diagram for oomph::RefineableBackwardStepQuadMesh< ELEMENT >:
Public Member Functions | |
| RefineableBackwardStepQuadMesh (const unsigned &nx, const unsigned &ny, const unsigned &nx_cut_out, const unsigned &ny_cut_out, const double &lx, const double &ly, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Pass overall number of elements in the horizontal and vertical directions, nx and ny, and the corresponding dimensions, lx and ly. nx_cut_out and ny_cut_out elements are cut out from the lower right corner to create the (reversed) backward step geometry. Timestepper defaults to Steady. More... | |
| virtual | ~RefineableBackwardStepQuadMesh () |
| Destructor: Empty. More... | |
 Public Member Functions inherited from oomph::BackwardStepQuadMesh< ELEMENT > | |
| BackwardStepQuadMesh (const unsigned &nx, const unsigned &ny, const unsigned &nx_cut_out, const unsigned &ny_cut_out, const double &lx, const double &ly, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Pass overall number of elements in the horizontal and vertical directions, nx and ny, and the corresponding dimensions, lx and ly. nx_cut_out and ny_cut_out elements are cut out from the lower right corner to create the (reversed) backward step geometry. Timestepper defaults to Steady. More... | |
| virtual | ~BackwardStepQuadMesh () |
| Destructor: Empty. More... | |
| Public Member Functions inherited from oomph::RectangularQuadMesh< ELEMENT > | |
| RectangularQuadMesh (const unsigned &nx, const unsigned &ny, const double &lx, const double &ly, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Simple constructor: nx: number of elements in x direction; ny: number of elements in y direction; lx, length of domain in x direction (0,lx); ly, length of domain in y direction (0,ly) Also pass pointer to timestepper (defaults to Steady) More... | |
| RectangularQuadMesh (const unsigned &nx, const unsigned &ny, const double &xmin, const double &xmax, const double &ymin, const double &ymax, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor that allows the specification of minimum and maximum values of x and y coordinates. More... | |
| RectangularQuadMesh (const unsigned &nx, const unsigned &ny, const double &lx, const double &ly, const bool &periodic_in_x, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Simple constructor: nx: number of elements in x direction; ny: number of elements in y direction; lx, length of domain in x direction (0,lx); ly, length of domain in y direction (0,ly) Boolean flag specifies if the mesh is periodic in the x-direction. Also pass pointer to timestepper (defaults to Steady) More... | |
| RectangularQuadMesh (const unsigned &nx, const unsigned &ny, const double &xmin, const double &xmax, const double &ymin, const double &ymax, const bool &periodic_in_x, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor that allows the specification of minimum and maximum values of x and y coordinates. Boolean flag specifies if the mesh is periodic in the x-direction. More... | |
| const unsigned & | nx () const |
| Return number of elements in x direction. More... | |
| const unsigned & | ny () const |
| Return number of elements in y direction. More... | |
| const double | x_min () const |
| Return the minimum value of x coordinate. More... | |
| const double | x_max () const |
| Return the maximum value of x coordinate. More... | |
| const double | y_min () const |
| Return the minimum value of y coordinate. More... | |
| const double | y_max () const |
| Return the maximum value of y coordinate. More... | |
| virtual void | element_reorder () |
| Reorder the elements: By default they are ordered in "horizontal" layers (increasing in x, then in y). This function changes this to an ordering in the vertical direction (y first, then x). This is more efficient if a frontal solver is used and the mesh has more elements in the x than the y direction. Can be overloaded in specific derived meshes. More... | |
| virtual double | x_spacing_function (unsigned xelement, unsigned xnode, unsigned yelement, unsigned ynode) |
| Return the value of the x-coordinate at the node given by the local node number (xnode, ynode) in the element (xelement,yelement). The description is in a "psudeo" two-dimensional coordinate system, so the range of xelement is [0,Nx-1], yelement is [0,Ny-1], and that of xnode and ynode is [0,Np-1]. The default is to return nodes that are equally spaced in the x coodinate. More... | |
| virtual double | y_spacing_function (unsigned xelement, unsigned xnode, unsigned yelement, unsigned ynode) |
| Return the value of the y-coordinate at the node given by the local node number (xnode, ynode) in the element (xelement,yelement). The description is in a "psudeo" two-dimensional coordinate system, so the range of xelement is [0,Nx-1], yelement is [0,Ny-1], and that of xnode and ynode is [0,Np-1]. The default it to return nodes that are equally spaced in the y coordinate. More... | |
Additional Inherited Members | |
| Protected Member Functions inherited from oomph::RectangularQuadMesh< ELEMENT > | |
| void | build_mesh (TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) |
| Generic mesh construction function: contains all the hard work. More... | |
| RectangularQuadMesh (const unsigned &nx, const unsigned &ny, const double &xmin, const double &xmax, const double &ymin, const double &ymax, const bool &periodic_in_x, const bool &build, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor that allows the specification of minimum and maximum values of x and y coordinates and does not build the mesh This is intend to be used in derived classes that overload the spacing functions. THis is scheduled to be changed, however. The reason why this MUST be done is because the virtual spacing functions cannot be called in the base constructur, because they will not have been overloaded yet!! More... | |
| Protected Attributes inherited from oomph::RectangularQuadMesh< ELEMENT > | |
| unsigned | Nx |
| Nx: number of elements in x-direction. More... | |
| unsigned | Ny |
| Ny: number of elements in y-direction. More... | |
| unsigned | Np |
| Np: number of (linear) points in the element. More... | |
| double | Xmin |
| Minimum value of x coordinate. More... | |
| double | Xmax |
| Maximum value of x coordinate. More... | |
| double | Ymin |
| Minimum value of y coordinate. More... | |
| double | Ymax |
| Maximum value of y coordinate. More... | |
| bool | Xperiodic |
| Boolean variable used to determine whether the mesh is periodic in the x-direction. More... | |
Detailed Description
template<class ELEMENT>
class oomph::RefineableBackwardStepQuadMesh< ELEMENT >
///////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////
Refineable backward step mesh
Definition at line 92 of file backward_step_mesh.template.h.
Constructor & Destructor Documentation
◆ RefineableBackwardStepQuadMesh()
template<class ELEMENT >
|
inline |
Pass overall number of elements in the horizontal and vertical directions, nx and ny, and the corresponding dimensions, lx and ly. nx_cut_out and ny_cut_out elements are cut out from the lower right corner to create the (reversed) backward step geometry. Timestepper defaults to Steady.
Definition at line 103 of file backward_step_mesh.template.h.
◆ ~RefineableBackwardStepQuadMesh()
template<class ELEMENT >
|
inlinevirtual |
Destructor: Empty.
Definition at line 124 of file backward_step_mesh.template.h.
The documentation for this class was generated from the following file: