Spine mesh class derived from standard cubic 3D mesh. The mesh contains a layer of spinified fluid elements (of type ELEMENT; e.g SpineElement<QCrouzeixRaviartElement<3>) for 3D problems, in which the interface's vertical position can vary. More...
#include <single_layer_cubic_spine_mesh.template.h>
Public Member Functions | |
| SingleLayerCubicSpineMesh (const unsigned &nx, const unsigned &ny, const unsigned &nz, const double &lx, const double &ly, const double &h, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor: Pass number of elements in x-direction, number of elements in y-direction, number of elements in z-direction, lengths in x- and y- directions, height of layer, and pointer to timestepper (defaults to Steady timestepper) More... | |
| virtual void | spine_node_update (SpineNode *spine_node_pt) |
| General node update function implements pure virtual function defined in SpineMesh base class and performs specific node update actions: along vertical spines. More... | |
 Public Member Functions inherited from oomph::SimpleCubicMesh< ELEMENT > | |
| SimpleCubicMesh (const unsigned &nx, const unsigned &ny, const unsigned &nz, const double &lx, const double &ly, const double &lz, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor: Pass number of elements in the x, y, and z directions, and the corresponding dimensions. Assume that the back lower left corner is located at (0,0,0) Timestepper defaults to Steady. More... | |
| SimpleCubicMesh (const unsigned &nx, const unsigned &ny, const unsigned &nz, const double &xmin, const double &xmax, const double &ymin, const double &ymax, const double &zmin, const double &zmax, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor: Pass the number of elements in the x,y and z directions and the correspoding minimum and maximum values of the coordinates in each direction. More... | |
| const unsigned & | nx () const |
| Access function for number of elements in x directions. More... | |
| const unsigned & | ny () const |
| Access function for number of elements in y directions. More... | |
| const unsigned & | nz () const |
| Access function for number of elements in y directions. More... | |
Protected Member Functions | |
| virtual void | build_single_layer_mesh (TimeStepper *time_stepper_pt) |
| Helper function to actually build the single-layer spine mesh (called from various constructors) More... | |
| Protected Member Functions inherited from oomph::SimpleCubicMesh< ELEMENT > | |
| void | build_mesh (TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) |
| Generic mesh construction function: contains all the hard work. More... | |
Additional Inherited Members | |
| Protected Attributes inherited from oomph::SimpleCubicMesh< ELEMENT > | |
| unsigned | Nx |
| Number of elements in x direction. More... | |
| unsigned | Ny |
| Number of elements in y direction. More... | |
| unsigned | Nz |
| Number of elements in y direction. More... | |
| double | Xmin |
| Minimum value of x coordinate. More... | |
| double | Xmax |
| Maximum value of x coordinate. More... | |
| double | Ymin |
| Minimum value of y coordinate. More... | |
| double | Ymax |
| Minimum value of y coordinate. More... | |
| double | Zmin |
| Minimum value of z coordinate. More... | |
| double | Zmax |
| Maximum value of z coordinate. More... | |
Detailed Description
template<class ELEMENT>
class oomph::SingleLayerCubicSpineMesh< ELEMENT >
Spine mesh class derived from standard cubic 3D mesh. The mesh contains a layer of spinified fluid elements (of type ELEMENT; e.g SpineElement<QCrouzeixRaviartElement<3>) for 3D problems, in which the interface's vertical position can vary.
This mesh has been carefully designed so that the numeration of the nodes on the boundaries 0 and 5 (bottom and top) coincides with the numeration of the spines
Definition at line 46 of file single_layer_cubic_spine_mesh.template.h.
Constructor & Destructor Documentation
◆ SingleLayerCubicSpineMesh()
| oomph::SingleLayerCubicSpineMesh< ELEMENT >::SingleLayerCubicSpineMesh | ( | const unsigned & | nx, |
| const unsigned & | ny, | ||
| const unsigned & | nz, | ||
| const double & | lx, | ||
| const double & | ly, | ||
| const double & | h, | ||
| TimeStepper * | time_stepper_pt = &Mesh::Default_TimeStepper |
||
| ) |
Constructor: Pass number of elements in x-direction, number of elements in y-direction, number of elements in z-direction, lengths in x- and y- directions, height of layer, and pointer to timestepper (defaults to Steady timestepper)
Constructor for spine 3D mesh: Pass number of elements in x-direction, number of elements in y-direction, number elements in z-direction, length, width and height of layer, and pointer to timestepper (defaults to Static timestepper).
Definition at line 41 of file single_layer_cubic_spine_mesh.template.cc.
References oomph::SingleLayerCubicSpineMesh< ELEMENT >::build_single_layer_mesh().
Member Function Documentation
◆ build_single_layer_mesh()
|
protectedvirtual |
Helper function to actually build the single-layer spine mesh (called from various constructors)
Helper function that actually builds the single-layer spine mesh based on the parameters set in the various constructors.
Definition at line 66 of file single_layer_cubic_spine_mesh.template.cc.
Referenced by oomph::SingleLayerCubicSpineMesh< ELEMENT >::SingleLayerCubicSpineMesh().
◆ spine_node_update()
|
inlinevirtual |
General node update function implements pure virtual function defined in SpineMesh base class and performs specific node update actions: along vertical spines.
Definition at line 66 of file single_layer_cubic_spine_mesh.template.h.
References oomph::SimpleCubicMesh< ELEMENT >::Zmin.
The documentation for this class was generated from the following files: