| BrethertonSpineMesh(const unsigned &nx1, const unsigned &nx2, const unsigned &nx3, const unsigned &nh, const unsigned &nhalf, const double &h, GeomObject *lower_wall_pt, GeomObject *upper_wall_pt, const double &zeta_start, const double &zeta_transition_start, const double &zeta_transition_end, const double &zeta_end, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | |
| build_mesh(TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::RectangularQuadMesh< ELEMENT > | protected |
| build_single_layer_mesh(TimeStepper *time_stepper_pt) | oomph::SingleLayerSpineMesh< ELEMENT > | protectedvirtual |
| bulk_element_pt(const unsigned long &i) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| Bulk_element_pt | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| control_element_pt() | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| Control_element_pt | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Default_spine_centre_fraction | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| element_reorder() | oomph::RectangularQuadMesh< ELEMENT > | virtual |
| find_distance_to_free_surface(GeomObject *const &fs_geom_object_pt, Vector< double > &initial_zeta, const Vector< double > &spine_base, const Vector< double > &spine_end) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | |
| H | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| initial_element_reorder() | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Interface_element_pt | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| interface_element_pt(const unsigned long &i) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| Lower_wall_pt | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| nbulk() const | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| nfree_surface_spines() | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| Nh | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Nhalf | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| ninterface_element() const | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| Np | oomph::RectangularQuadMesh< ELEMENT > | protected |
| nx() const | oomph::RectangularQuadMesh< ELEMENT > | inline |
| Nx | oomph::RectangularQuadMesh< ELEMENT > | protected |
| Nx1 | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Nx2 | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Nx3 | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Ny | oomph::RectangularQuadMesh< ELEMENT > | protected |
| ny() const | oomph::RectangularQuadMesh< ELEMENT > | inline |
| pin_all_spines() | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| RectangularQuadMesh(const unsigned &nx, const unsigned &ny, const double &xmin, const double &xmax, const double &ymin, const double &ymax, const bool &periodic_in_x, const bool &build, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::RectangularQuadMesh< ELEMENT > | inlineprotected |
| RectangularQuadMesh(const unsigned &nx, const unsigned &ny, const double &lx, const double &ly, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::RectangularQuadMesh< ELEMENT > | inline |
| RectangularQuadMesh(const unsigned &nx, const unsigned &ny, const double &xmin, const double &xmax, const double &ymin, const double &ymax, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::RectangularQuadMesh< ELEMENT > | inline |
| RectangularQuadMesh(const unsigned &nx, const unsigned &ny, const double &lx, const double &ly, const bool &periodic_in_x, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::RectangularQuadMesh< ELEMENT > | inline |
| RectangularQuadMesh(const unsigned &nx, const unsigned &ny, const double &xmin, const double &xmax, const double &ymin, const double &ymax, const bool &periodic_in_x, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::RectangularQuadMesh< ELEMENT > | inline |
| reposition_spines(const double &zeta_lo_transition_start, const double &zeta_lo_transition_end, const double &zeta_up_transition_start, const double &zeta_up_transition_end) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | |
| set_spine_centre_fraction_pt(double *const &fraction_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| SingleLayerSpineMesh(const unsigned &nx, const unsigned &ny, const double &lx, const double &h, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::SingleLayerSpineMesh< ELEMENT > | |
| SingleLayerSpineMesh(const unsigned &nx, const unsigned &ny, const double &lx, const double &h, const bool &periodic_in_x, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::SingleLayerSpineMesh< ELEMENT > | |
| spine_centre_fraction() const | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inline |
| Spine_centre_fraction_pt | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| spine_node_update(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlinevirtual |
| spine_node_update_channel(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| spine_node_update_film_lower(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| spine_node_update_film_upper(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| spine_node_update_horizontal_transition_lower(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| spine_node_update_horizontal_transition_upper(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| spine_node_update_vertical_transition_lower(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| spine_node_update_vertical_transition_upper(SpineNode *spine_node_pt) | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | inlineprotected |
| Upper_wall_pt | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| x_max() const | oomph::RectangularQuadMesh< ELEMENT > | inline |
| x_min() const | oomph::RectangularQuadMesh< ELEMENT > | inline |
| x_spacing_function(unsigned xelement, unsigned xnode, unsigned yelement, unsigned ynode) | oomph::RectangularQuadMesh< ELEMENT > | inlinevirtual |
| Xmax | oomph::RectangularQuadMesh< ELEMENT > | protected |
| Xmin | oomph::RectangularQuadMesh< ELEMENT > | protected |
| Xperiodic | oomph::RectangularQuadMesh< ELEMENT > | protected |
| y_max() const | oomph::RectangularQuadMesh< ELEMENT > | inline |
| y_min() const | oomph::RectangularQuadMesh< ELEMENT > | inline |
| y_spacing_function(unsigned xelement, unsigned xnode, unsigned yelement, unsigned ynode) | oomph::RectangularQuadMesh< ELEMENT > | inlinevirtual |
| Ymax | oomph::RectangularQuadMesh< ELEMENT > | protected |
| Ymin | oomph::RectangularQuadMesh< ELEMENT > | protected |
| Zeta_end | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Zeta_start | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Zeta_transition_end | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |
| Zeta_transition_start | oomph::BrethertonSpineMesh< ELEMENT, INTERFACE_ELEMENT > | protected |