This is the complete list of members for oomph::SolidTriangleMesh< ELEMENT >, including all inherited members.
| add_face_index_at_shared_boundary(const unsigned &b, const unsigned &i) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| add_shared_boundary_element(const unsigned &b, FiniteElement *ele_pt) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| add_shared_boundary_node(const unsigned &b, Node *node_pt) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| boundary_marked_as_shared_boundary(const unsigned &b, const unsigned &isub) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Boundary_marked_as_shared_boundary | oomph::TriangleMesh< ELEMENT > | protected |
| boundary_segment_node_pt(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inline |
| boundary_segment_node_pt(const unsigned &b, const unsigned &s) | oomph::TriangleMesh< ELEMENT > | inline |
| boundary_segment_node_pt(const unsigned &b, const unsigned &s, const unsigned &n) | oomph::TriangleMesh< ELEMENT > | inline |
| boundary_subpolylines(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Boundary_subpolylines | oomph::TriangleMesh< ELEMENT > | protected |
| boundary_was_splitted(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Boundary_was_splitted | oomph::TriangleMesh< ELEMENT > | protected |
| break_loops_on_shared_polyline_helper(const unsigned &initial_shd_bnd_id, std::list< Node * > &input_nodes, Vector< FiniteElement * > &input_boundary_element_pt, Vector< int > &input_face_index_element, const int &input_connect_to_the_left, const int &input_connect_to_the_right, Vector< std::list< Node * >> &output_sorted_nodes_pt, Vector< Vector< FiniteElement * >> &output_boundary_element_pt, Vector< Vector< int >> &output_face_index_element, Vector< int > &output_connect_to_the_left, Vector< int > &output_connect_to_the_right) | oomph::TriangleMesh< ELEMENT > | protected |
| break_loops_on_shared_polyline_load_balance_helper(const unsigned &initial_shd_bnd_id, std::list< Node * > &input_nodes, Vector< FiniteElement * > &input_boundary_element_pt, Vector< FiniteElement * > &input_boundary_face_element_pt, Vector< int > &input_face_index_element, const int &input_connect_to_the_left, const int &input_connect_to_the_right, Vector< std::list< Node * >> &output_sorted_nodes_pt, Vector< Vector< FiniteElement * >> &output_boundary_element_pt, Vector< Vector< FiniteElement * >> &output_boundary_face_element_pt, Vector< Vector< int >> &output_face_index_element, Vector< int > &output_connect_to_the_left, Vector< int > &output_connect_to_the_right) | oomph::TriangleMesh< ELEMENT > | protected |
| build_from_scaffold(TimeStepper *time_stepper_pt, const bool &use_attributes) | oomph::TriangleMesh< ELEMENT > | protected |
| build_triangulateio(const std::string &poly_file_name, TriangulateIO &triangulate_io, bool &use_attributes) | oomph::TriangleMesh< ELEMENT > | protected |
| check_connections_of_polyline_nodes(std::set< FiniteElement * > &element_in_processor_pt, const int &root_edge_bnd_id, std::map< std::pair< Node *, Node * >, bool > &overlapped_face, std::map< unsigned, std::map< Node *, bool >> &node_on_bnd_not_overlapped_by_shd_bnd, std::list< Node * > ¤t_polyline_nodes, std::map< unsigned, std::list< Node * >> &shared_bnd_id_to_sorted_list_node_pt, const unsigned &node_degree, Node *&new_node_pt, const bool called_from_load_balance=false) | oomph::TriangleMesh< ELEMENT > | protected |
| compute_boundary_segments_connectivity_and_initial_zeta_values(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | |
| compute_holes_left_by_halo_elements_helper(Vector< Vector< double >> &output_holes_coordinates) | oomph::TriangleMesh< ELEMENT > | protected |
| convex_hull(std::vector< Point > P) | oomph::TriangleMesh< ELEMENT > | inlineprivate |
| coord2_t typedef | oomph::TriangleMesh< ELEMENT > | private |
| coord_t typedef | oomph::TriangleMesh< ELEMENT > | private |
| create_distributed_domain_representation(Vector< TriangleMeshPolygon * > &polygons_pt, Vector< TriangleMeshOpenCurve * > &open_curves_pt) | oomph::TriangleMesh< ELEMENT > | protected |
| create_polylines_from_halo_elements_helper(const Vector< unsigned > &element_domain, std::map< GeneralisedElement *, unsigned > &element_to_global_index, std::set< FiniteElement * > &element_in_processor_pt, Vector< Vector< Vector< GeneralisedElement * >>> &input_halo_elements, std::map< std::pair< Node *, Node * >, unsigned > &elements_edges_on_boundary, Vector< Vector< Vector< TriangleMeshPolyLine * >>> &output_polylines_pt) | oomph::TriangleMesh< ELEMENT > | protected |
| create_shared_boundaries(OomphCommunicator *comm_pt, const Vector< unsigned > &element_domain, const Vector< GeneralisedElement * > &backed_up_el_pt, const Vector< FiniteElement * > &backed_up_f_el_pt, std::map< Data *, std::set< unsigned >> &processors_associated_with_data, const bool &overrule_keep_as_halo_element_status) | oomph::TriangleMesh< ELEMENT > | protected |
| create_shared_polyline(const unsigned &my_rank, const unsigned &shd_bnd_id, const unsigned &iproc, const unsigned &jproc, std::list< Node * > &sorted_nodes, const int &root_edge_bnd_id, Vector< FiniteElement * > &bulk_bnd_ele_pt, Vector< int > &face_index_ele, Vector< Vector< TriangleMeshPolyLine * >> &unsorted_polylines_pt, const int &connect_to_the_left_flag, const int &connect_to_the_right_flag) | oomph::TriangleMesh< ELEMENT > | protected |
| create_shared_polylines_connections() | oomph::TriangleMesh< ELEMENT > | protected |
| create_tmp_open_curves_helper(Vector< Vector< TriangleMeshPolyLine * >> &sorted_open_curves_pt, Vector< TriangleMeshPolyLine * > &unsorted_shared_to_internal_poly_pt, Vector< TriangleMeshOpenCurve * > &open_curves_pt) | oomph::TriangleMesh< ELEMENT > | protected |
| create_tmp_polygons_helper(Vector< Vector< TriangleMeshPolyLine * >> &polylines_pt, Vector< TriangleMeshPolygon * > &polygons_pt) | oomph::TriangleMesh< ELEMENT > | protected |
| cross(const Point &O, const Point &A, const Point &B) | oomph::TriangleMesh< ELEMENT > | inlineprivate |
| dump_distributed_info_for_restart(std::ostream &dump_file) | oomph::TriangleMesh< ELEMENT > | |
| Face_index_at_shared_boundary | oomph::TriangleMesh< ELEMENT > | protected |
| face_index_at_shared_boundary(const unsigned &b, const unsigned &e) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| final_shared_boundary_id() | oomph::TriangleMesh< ELEMENT > | inline |
| Final_shared_boundary_id | oomph::TriangleMesh< ELEMENT > | protected |
| First_time_compute_holes_left_by_halo_elements | oomph::TriangleMesh< ELEMENT > | protected |
| flush_face_index_at_shared_boundary() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| flush_shared_boundary_element() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| flush_shared_boundary_element(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| flush_shared_boundary_node() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| flush_shared_boundary_node(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| flush_shared_boundary_polyline_pt() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| generic_constructor(Vector< TriangleMeshPolygon * > &outer_boundary_pt, Vector< TriangleMeshPolygon * > &internal_polygon_pt, Vector< TriangleMeshOpenCurve * > &open_polylines_pt, const double &element_area, Vector< Vector< double >> &extra_holes_coordinates, std::map< unsigned, Vector< double >> ®ions_coordinates, std::map< unsigned, double > ®ions_areas, TimeStepper *time_stepper_pt, const bool &use_attributes, const bool &refine_boundary, const bool &refine_internal_boundary) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| get_element_edges_on_boundary(std::map< std::pair< Node *, Node * >, unsigned > &element_edges_on_boundary) | oomph::TriangleMesh< ELEMENT > | protected |
| get_halo_elements_on_all_procs(const unsigned &nproc, const Vector< unsigned > &element_domain, const Vector< GeneralisedElement * > &backed_up_el_pt, std::map< Data *, std::set< unsigned >> &processors_associated_with_data, const bool &overrule_keep_as_halo_element_status, std::map< GeneralisedElement *, unsigned > &element_to_global_index, Vector< Vector< Vector< GeneralisedElement * >>> &output_halo_elements_pt) | oomph::TriangleMesh< ELEMENT > | protected |
| get_shared_boundaries_overlapping_internal_boundary(const unsigned &internal_bnd_id, Vector< unsigned > &shd_bnd_ids) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| identify_boundary_segments_and_assign_initial_zeta_values(const unsigned &b, Vector< FiniteElement * > &input_face_ele_pt, const bool &is_internal_boundary, std::map< FiniteElement *, FiniteElement * > &face_to_bulk_element_pt) | oomph::TriangleMesh< ELEMENT > | |
| identify_boundary_segments_and_assign_initial_zeta_values(const unsigned &b, TriangleMesh< ELEMENT > *original_mesh_pt) | oomph::TriangleMesh< ELEMENT > | |
| initial_shared_boundary_id() | oomph::TriangleMesh< ELEMENT > | inline |
| Initial_shared_boundary_id | oomph::TriangleMesh< ELEMENT > | protected |
| is_node_on_shared_boundary(const unsigned &b, Node *const &node_pt) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| load_balance(const Vector< unsigned > &target_domain_for_local_non_halo_element) | oomph::TriangleMesh< ELEMENT > | inlinevirtual |
| nboundary_subpolylines(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundaries(const unsigned &p, const unsigned &q) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundaries() const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundary_curves(const unsigned &p) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundary_element(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundary_node(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundary_overlaps_internal_boundary() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| nshared_boundary_polyline(const unsigned &p, const unsigned &c) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| oomph_vertex_nodes_id() | oomph::TriangleMesh< ELEMENT > | inline |
| Oomph_vertex_nodes_id | oomph::TriangleMesh< ELEMENT > | protected |
| operator=(const TriangleMesh &)=delete | oomph::TriangleMesh< ELEMENT > | |
| Original_extra_holes_coordinates | oomph::TriangleMesh< ELEMENT > | protected |
| output_boundary_coordinates(const unsigned &b, std::ostream &outfile) | oomph::TriangleMesh< ELEMENT > | |
| re_assign_initial_zeta_values_for_internal_boundary(const unsigned &b, Vector< std::list< FiniteElement * >> &old_segment_sorted_ele_pt, std::map< FiniteElement *, bool > &old_is_inverted) | oomph::TriangleMesh< ELEMENT > | |
| re_scale_re_assigned_initial_zeta_values_for_internal_boundary(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | |
| read_distributed_info_for_restart(std::istream &restart_file) | oomph::TriangleMesh< ELEMENT > | |
| read_unsigned_line_helper(std::istream &read_file) | oomph::TriangleMesh< ELEMENT > | inline |
| reestablish_distribution_info_for_restart(OomphCommunicator *comm_pt, std::istream &restart_file) | oomph::TriangleMesh< ELEMENT > | inlinevirtual |
| Regions_areas | oomph::TriangleMesh< ELEMENT > | protected |
| remesh_from_internal_triangulateio() | oomph::TriangleMesh< ELEMENT > | inline |
| reset_boundary_element_info(Vector< unsigned > &ntmp_boundary_elements, Vector< Vector< unsigned >> &ntmp_boundary_elements_in_region, Vector< FiniteElement * > &deleted_elements) | oomph::TriangleMesh< ELEMENT > | virtual |
| select_boundary_face_elements(Vector< FiniteElement * > &face_el_pt, const unsigned &b, bool &is_internal_boundary, std::map< FiniteElement *, FiniteElement * > &face_to_bulk_element_pt) | oomph::TriangleMesh< ELEMENT > | |
| set_mesh_level_time_stepper(TimeStepper *const &time_stepper_pt, const bool &preserve_existing_data) | oomph::TriangleMesh< ELEMENT > | inline |
| Shared_boundaries_ids | oomph::TriangleMesh< ELEMENT > | protected |
| shared_boundaries_ids() const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_ids() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_ids(const unsigned &p) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_ids(const unsigned &p) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_ids(const unsigned &p, const unsigned &q) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_ids(const unsigned &p, const unsigned &q) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_ids(const unsigned &p, const unsigned &q, const unsigned &i) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundaries_in_this_processor(Vector< unsigned > &shared_boundaries_in_this_processor) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundary_element_pt(const unsigned &b, const unsigned &e) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Shared_boundary_element_pt | oomph::TriangleMesh< ELEMENT > | protected |
| shared_boundary_from_processors() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundary_from_processors(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Shared_boundary_from_processors | oomph::TriangleMesh< ELEMENT > | protected |
| shared_boundary_node_pt(const unsigned &b, const unsigned &n) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Shared_boundary_node_pt | oomph::TriangleMesh< ELEMENT > | protected |
| shared_boundary_overlapping_internal_boundary(const unsigned &shd_bnd_id) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundary_overlaps_internal_boundary(const unsigned &shd_bnd_id) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundary_overlaps_internal_boundary() | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Shared_boundary_overlaps_internal_boundary | oomph::TriangleMesh< ELEMENT > | protected |
| shared_boundary_polyline_pt(const unsigned &p, const unsigned &c) | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| shared_boundary_polyline_pt(const unsigned &p, const unsigned &c, const unsigned &i) const | oomph::TriangleMesh< ELEMENT > | inlineprotected |
| Shared_boundary_polyline_pt | oomph::TriangleMesh< ELEMENT > | protected |
| SolidTriangleMesh(TriangleMeshParameters &triangle_mesh_parameters, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::SolidTriangleMesh< ELEMENT > | inline |
| SolidTriangleMesh(const std::string &node_file_name, const std::string &element_file_name, const std::string &poly_file_name, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper, const bool &allow_automatic_creation_of_vertices_on_boundaries=true) | oomph::SolidTriangleMesh< ELEMENT > | inline |
| sort_polylines_helper(Vector< TriangleMeshPolyLine * > &unsorted_polylines_pt, Vector< Vector< TriangleMeshPolyLine * >> &sorted_polylines_pt) | oomph::TriangleMesh< ELEMENT > | protected |
| synchronize_boundary_coordinates(const unsigned &b) | oomph::TriangleMesh< ELEMENT > | |
| Time_stepper_pt | oomph::TriangleMesh< ELEMENT > | |
| Tmp_mesh_pt | oomph::TriangleMesh< ELEMENT > | protected |
| TriangleMesh() | oomph::TriangleMesh< ELEMENT > | inline |
| TriangleMesh(const std::string &node_file_name, const std::string &element_file_name, const std::string &poly_file_name, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper, const bool &allow_automatic_creation_of_vertices_on_boundaries=true) | oomph::TriangleMesh< ELEMENT > | inline |
| TriangleMesh(TriangleMeshParameters &triangle_mesh_parameters, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | oomph::TriangleMesh< ELEMENT > | inline |
| TriangleMesh(const std::string &poly_file_name, const double &element_area, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper, const bool &allow_automatic_creation_of_vertices_on_boundaries=true) | oomph::TriangleMesh< ELEMENT > | inline |
| TriangleMesh(const TriangleMesh &dummy)=delete | oomph::TriangleMesh< ELEMENT > | |
| triangulateio_exists() | oomph::TriangleMesh< ELEMENT > | inline |
| Triangulateio_exists | oomph::TriangleMesh< ELEMENT > | protected |
| update_holes_information_helper(Vector< TriangleMeshPolygon * > &polygons_pt, Vector< Vector< double >> &output_holes_coordinates) | oomph::TriangleMesh< ELEMENT > | protected |
| update_triangulateio(Vector< Vector< double >> &internal_point) | oomph::TriangleMesh< ELEMENT > | inline |
| update_triangulateio() | oomph::TriangleMesh< ELEMENT > | inline |
| Use_attributes | oomph::TriangleMesh< ELEMENT > | |
| ~SolidTriangleMesh() | oomph::SolidTriangleMesh< ELEMENT > | inlinevirtual |
| ~TriangleMesh() | oomph::TriangleMesh< ELEMENT > | inlinevirtual |